Retrieval Tools

 

Even the smallest object can cause large expenses for your facility. Our Remote Retrieval Solution (JAWS 2.0) enables you to locate visually and remove loose parts, foreign material, debris and other objects that should not be there, from deep inside your industrial system to allow you to stay on schedule and avoid costly tear down.

Our complete retrieval tool kit includes a myriad of retrieval tools such as rare earth magnets, snares, hooks, grippers and accessories which enables you to navigate, extend and reach into the deepest recesses for efficient and clean retrieval. They are ideal for hazardous environment and confined space. The tools are modular for portability and ease of configuring to specific requirements.

Fail Safe Construction

All tools are constructed using high strength stainless steel to ensure they hold up to the toughest industrial environment. They are fully submersible to enable retrieval underwater.

Wide Variety of Tools

Each foreign object retrieval presents its own challenge. There are eleven different tools to select from in the kit to meet different retrieval requirements.

Modular with Universal Connectors

Each of the tools and accessories in the tool kit is modular with universal connectors. This allows you to mix, match and configure the tool best suited for the specific retrieval job.

Motorised Remote Gripper Kit

Motorised Remote Gripper Kit with Changeable Jaws

Fork/Tine, Serrated Flat, Serrated Curved Jaw Sets; Jaws open to 2.5″ (6.35 cm)

Waterproof to 100′ (30m)

50′ (15m) Main Cable plus 50′ (15m) Extension Cable

Battery-operated Control Box (9 x AA size batteries)

Universal socket quick-disconnect fitting fits all poles and accessories

 

Fork and Tine JaFork & Tine Jaww Set 

Includes one fork jaw and one tine jaw with fastening screws and hex key

Stainless Steel Construction

 

 

Flat Serrated Jaw

Flat Serrated Jaw Set

Includes one pair of jaws with fastening screws and hex key

Stainless Steel Construction

 

 

Curve Curved Serrated JawSerrated Jaw Set

Includes one pair of jaws with fastening screws and hex key

Stainless Steel Construction

 

 

Small retrieval magnet

Small Retrieval Magnet

8 lbf (35 N) optimal lift

High-power rare-earth magnet mounted in a durable, stainless steel housing for retrieving iron, steel and some stainless steel foreign objects. Universal socket quick-disconnect fitting fits all poles and accessories

0.69″ (17.5 mm) Diameter

 

Large retrieval magnet

Large Retrieval Magnet

30 lbf (133 N) optimal lift

High-power rare-earth magnet mounted in a durable, stainless steel housing for retrieving iron, steel and some stainless steel foreign objects. Universal socket quick-disconnect fitting fits all poles and accessories

1.25″ (32 mm) Diameter

Hook, J Type

 

Hook, J Type

Stainless Steel with pointed tip

1.0″ (25.4 mm) Hook Opening; 0.5″ (12.7 mm) Hook Depth; 1.9″ (48.3 mm) Hook Length

Universal socket quick-disconnect fitting fits all poles and accessories

 

Hook, U Type Short

 

Hook, U Type Small

Stainless Steel with pointed tip

1.0″ (25.4 mm) Hook Opening; 0.6″ (15.2 mm) Hook Depth; 1.7″ (43.2 mm) Hook Length

Universal socket quick-disconnect fitting fits all poles and accessories

 

Hook, U Type Long

 

Hook, U Type Long

1.0″ (25.4 mm) Hook Opening; 1.0″ (25.4 mm) Hook Depth; 1.7″ (43.2 mm) Hook Length

Universal socket quick-disconnect fitting fits all poles and accessories

 

 

Hook, U Type Large

 Hook, U Type Large

Stainless Steel with pointed tip

2.0″ (50.8 mm) Hook Opening; 1.0″ (25.4 mm) Hook Depth; 2.2″ (55.9 mm) Hook Length

Universal socket quick-disconnect fitting fits all poles and accessories

 

 

Small dia snare

Small Retrieval Snare

0.75″ (19 mm) Stainless steel ball with 1/16″ (1.6 mm) diameter wire rope 50′ (15 m) long to ensnare foreign objects

Universal socket quick-disconnect fitting fits all poles and accessories

 

Large diameter snare

Large Retrieval Snare

1.0″ (25.4 mm) Stainless steel ball with 3/32″ (2.4 mm) diameter wire rope 50′ (15 m) long to ensnare foreign objects

Universal socket quick-disconnect fitting fits all poles and accessories

 

 

 

Adjustable Knuckle Joint

0.63″ (16 mm) diameter x 2.3″ (57 mm) long

Stainless steel joint to lock push rods at any angle between +95° and -95°. Universal pin and socket quick disconnect fitting fits all poles and accessories.

 

 

 

Flexible Push Rod PolesFlexible Push Rod Poles

Universal pin and socket quick-disconnect pole ends

  • 3/16″ (4.76 mm) diameter fibreglass x 60′ (1.5 m) length
  • 1/4″ (6.35 mm) diameter fibreglass x 60′ (1.5 m) length
  • 5/16″ (7.94 mm) diameter fibreglass x 60′ (1.5 m) length
  • 3/8″ (9.53 mm) diameter fibreglass x 60′ (1.5 m) length

 

 

Push Rod Extensions

Push Rod Extension

Universal pin and socket quick-disconnect pole ends

  • 5/16″ (7.96 mm) diameter fibreglass x 6″ (0.15 m) length
  • 5/16″ (7.96 mm) diameter fibreglass x 12″ (0.3 m) length

 

 

Spring coupling

Flexible Spring Coupling

Allows flexibility in-line with rigid poles. Stainless steel construction, used for negotiating tight bends.

Universal pin and socket quick-disconnect fitting fits all poles and accessories.

0.75″ (19 mm) diameter x 5.9″ (150 mm) length

Rubber Coupling 2

 

Flexible Rubber Coupling

Allows flexibility in-line with rigid poles. Stainless steel and natural rubber construction., used for negotiating tight bends.

Universal pin and socket quick-disconnect fitting fits all poles and accessories.

0.75″ (19 mm) diameter x 5.9″ (150 mm) length

 

 

T-handle

T-Handle

Stainless steel with pin and socket quick-disconnect fitting to assist twisting the poles and tools into position.

 

 

Our Partners

Contact Us

Viscoy Pte Ltd
11 Lorong 3 Toa Payoh,
#01-13, Block B, Jackson Square,
Singapore 319579

t: +65 6451 1011
f: +65 6451 1911

Email: Click here

Locate Us

Click to open larger map